Permatex 80064 High Tack Spray-A-Gasket Sealant

0.0

Description

Permatex 80064 High Tack Spray-A-Gasket Sealant


Permatex High Tack Spray-A-Gasket Sealant is an aerosol product formulated as a sealant that dries quickly to a highly tacky film. The product was specifically designed to hold the heaviest gaskets in place during assembly.
PRODUCT BENEFITS
  • Dries fast to a highly tacky, elastomeric film
  • Remains tacky indefinitely - can be applied in advance for
    convenience in assembly
  • Highly resistant to automotive fuels and oils
  • Sensor safe
  • Temperature Range -65°F to 500°F
TYPICAL APPLICATIONS

Bond and seal any type of cut gasket including:
  • Rubber
  • Cork
  • Felt
  • Paper
  • Metal
DIRECTIONS FOR USE


  1. Provide adequate ventilation.
  2. Surfaces should be free of oil, dirt and grease.
  3. Mask areas that should not be coated.
  4. Shake can with ball agitator for one minute. For best
    results, aerosol can should be at room temperature
    before spraying.
  5. Holding can 8 to 10 inches from the surface to be
    coated, press the nozzle and spray the product
    uniformly. Apply to flange surfaces and both sides of the
    gasket and the bolt threads. Avoid overspray. For best
    coverage, 2 to 3 light coats are required.
  6. Wait for the solvent to evaporate before assembly.
    The product can be applied in advance and still remain
    tacky when assembled.

Note: Aerosol product will coat 10 to 12 standard valve covers, 3 coats per side.
For Cleanup


  1. Turn can upside-down and spray to clear nozzle.
  2. Clean hands with Permatex
    brand hand cleaners.

GENERAL INFORMATION

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
STORAGE

Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8° and 28°C
(46° and 82°F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
Read More Read Less
Products dan Adhesive / Sealant

Categories

Permatex

Products Brand

You may also like