Molykote Metal Protector 400ml

Molykote Metal Protector 400ml

FEATURES

Long-term corrosion protection; Transparent coating; Low coefficient of friction.

APPLICATIONS

• Corrosion protection for metal parts which have to be stored or transported.

FIRE-FIGHTING MEASURES

Suitable extinguishing media

• On large fires use dry chemical, foam or water spray (fog). On small fires use carbon
  dioxide (CO2), dry chemical or water spray. Water can be used to cool fire exposed
  containers.

Unsuitable extinguishing
media

• None known.

Hazards during fire
fighting

• Electrostatic charges may be generated during transfer of product from its container.
• Ensure that all equipment is electrically earthed.
• Vapours may form explosive mixtures with air.

Hazardous Combustion
Products

• Thermal breakdown of this product during fire or very high heat conditions may evolve
  the following decomposition products: Carbon oxides and traces of incompletely burned
  carbon compounds. Formaldehyde. Sulphur products. Nitrogen products.

Special protective
equipment/procedures

• A self-contained respirator and protective clothing should be worn. Determine the need to
  evacuate or isolate the area according to your local emergency plan. Use water spray to
  keep fire exposed containers cool.

ACCIDENTAL RELEASE MEASURES

Personal precautions,
protective equipment and
emergency procedures

• A self-contained respirator and protective clothing should be worn. Determine the need to
  evacuate or isolate the area according to your local emergency plan. Eliminate all possible
  sources of ignition.

Environmental
precautions

• Do not empty into drains. Prevent from spreading or entering into drains, ditches or rivers
  by using sand, earth or other appropriate barriers. Inform local authorities if this cannot be
  prevented.

Methods and materials for
containment and cleaning up

• Determine the need to evacuate or isolate the area according to your local emergency plan.
  Eliminate all possible sources of ignition. Very large spills should be contained by
  bunding, etc... procedures. Mop, wipe or soak up with absorbent material and place in a
  container with a lid. The spilled product produces an extremely slippery surface.

HANDLING AND STORAGE

Advice on safe handling

• General ventilation is required.
• Local ventilation is recommended.
• Avoid skin and eye contact.
• Do not breathe vapour. Do not breathe spray or mist. Do not empty into drains.

Advice on storage

• Store in a flameproof, well ventilated area.
• Electrostatic charges may be generated during transfer of product from its container.
• Ensure that all equipment is electrically earthed.
• Keep container tightly closed.
• Vapours may form explosive mixtures with air.
• Storage temperature: minimum 10 °C, maximum 30 °C

Specific uses

• Refer to technical data sheet available on request.