Crc 2.26 Electrical Multi Purpose Precision Lubricant 450g 2005

Crc 2.26 Electrical Multi Purpose Precision Lubricant 450g 2005

CRC 2.26 is a stable, inert organic formula, especially prepared to prevent malfunction and deterioration due to the effect of moisture and corrosion, extends operational life, reduces down time and maintenance. It displaces water and moisture, seals hard surfaces with a continuous molecular film and never becomes dry, hard or brittle.

Features:

• Contains no silicone
• Protective film seals out moisture
• Moisture eliminator for wet equipment
• Moisture barrier to prevent trouble before it starts
• Lubricant 25 to 50µ will give lubrication equivalent to a 10 weight motor oil

Application:

• Recommended for preventative maintenance programs, eliminates breakdowns due to poor environmental exposure, stopping leaking & arcing, corrosion protection of all electrical equipment during storage & transport and lubrication of contacts.

Specification:

• Brand: CRC
• Product Type: Precision Lubricant
• Appearance: Amber Liquid
• Flammability: Flammable
• Flash Point: 110℃ TCC
• Specific Gravity: 0.88
• Weight: 450 g

Directions

• Always read the entire label before using product.
• Protect eyes, skin and do not inhale. Refer to MSDS.
• Spray light even coat to protect surfaces and seal out moisture.
• Apply liberally to loosen rusted/seized parts; full penetration may require several
  hours.
• To displace water, spray wet surfaces until run-off is clear. (A detailed CRC waterdamage restoration procedure is available on request).
• Can be removed with CRC Lectra Clean.
• Use only in well ventilated area. Allow solvent to evaporate before energising (up
  to four hours, depending on surface condition and environment).

Disposal

Disposal requirements vary by state and local regulations. All used and unused
product should be disposed of in conformance with local, state and commonwealth
laws and regulations.

Special Use Warnings

Aerosol Cans

Do not puncture, incinerate or store above 500C. Exposure to high temperatures may
cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol
cans will conduct electricity. Keep away from all live electrical sources including
battery terminals, solenoids, electrical panels and other electronic components.
Failure to observe this warning may result in serious injury from flash fire and/or
electrical shock.

General

Use only in well ventilated area. Ventilation may be improved by opening a window or
door or providing mechanical assistance. Avoid continuous breathing of vapour and
spray mist. Avoid contact with the skin and eyes. If ventilation is not adequate,
respiratory protection should be worn. For more information regarding short term and
long term exposure, review this product’s Material Safety Data Sheet.