Loctite High Performance N-5000 High Purity Anti-seize 453.6g

Loctite High Performance N-5000 High Purity Anti-seize 453.6g

• Tensile Strength : 3.5 MPa
• Temperature : High Temperature
• Key Substrates : Metal: Steel - Stainless Steel
• Color : Silver
• Curing Type : Non-curing
• Application : Anti-seize

LOCTITE LB N-5000 is a silver-coloured, nickel-based anti-seize lubricant paste of highest purity. It has the lowest practical levels of halogens, sulphur and heavy metals, including copper. Typical applications include locations where stainless steel fasteners are used. This product is typically used in applications with an operating range of -20.2°F to +2,399°F (-29°C to +1,315°C).

• Produced under 100% controlled conditions for the highest purity
• Extreme high temperature tolerance
• General composition of nickel and graphite flake in petroleum carrier
• Has the lowest practical levels of halogens, sulphur and heavy metals, including copper
• All ingredients are selected for extreme purity
• Prevents high friction, corrosion, galling/seizing and promotes uniform and predictable clamping

LOCTITE®
LB N-5000 is a specially formulated nickel-based
anti-seize lubricant, produced under 100% controlled
conditions for the highest purity. It is formulated with high purity
raw materials and contains only trace levels of halogens,
sulfur, copper, aluminum and heavy metals, including copper. It
provides significant improvement in anti-seize performance
and gives it more uniform torque tension. It has a general
composition of nickel and graphite flake in petroleum carrier.
All ingredients are selected for extreme purity. During
assembly, it prevents high friction, galling and seizing and
promotes uniform and predictable clamping. During operation,
the high purity prevents stress corrosion. During disassembly,
it prevents seizing, galling and destruction of threads. Typical
applications include bolts, studs, valves, pipe fittings, slip fits
and press fits in nuclear power generating plants, chemical
plants, pharmaceutical plants, paper mills and other locations
where stainless steel fasteners are used. This
product is typically used in applications with an operating
range of -29 °C to +1315 °C.

TYPICAL PERFORMANCE

An anti-seize lubricant used on a bolt helps to develop greater
clamp load for the same torque compared to an unlubricated
bolt. An additional benefit is greater uniformity in clamp load
among a series of bolts.

GENERAL INFORMATION

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Safety Data Sheet (SDS).

Directions for use:

1. Before or during assembly, wipe or brush onto threads
   and other joint surfaces needing protection.
2. Use full strength. Do not thin.

Loctite Material Specification

LMS dated July-29, 2008. Test reports for each batch are
available for the indicated properties. LMS test reports include
selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.

Storage

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.