Surface Protective Material for Plastic SPV™-362MK2/362X-2K2

Surface protective materials with adhesion suitable for machining.

SPV-362MK2/362X-2K2 is suitable for protecting plastic surfaces. Both products have adhesive suitable for machining.

Features

• Extremely small changes in adhesive strength after lamination, ensuring easy peeling.
• Minimally affected by the surface condition (roughness) of the substrate, making it applicable for a wide range of substrates.
• Withstands light processing, such as shallow drawing and bending, to prevent damage during processing.
• Light unwinding force and easy lamination.

Properties

[Test method]

• *1: Nominal thickness
• *2: Peeling angle: 180°, Peeling speed: 300mm/min

Applications

• Surface protection for melamine plywood, pre-coated, and resin boards during curing, transportation, and processing.

Precautions

• Avoid direct sunlight and store at ambient temperature/humidity.
• Applying excessive pressure during lamination will cause the end of the tape to peel.
• Please test and evaluate the product thoroughly prior to use under severe conditions.
• Degrease the surface thoroughly before laminating a film to an adherend treated with machining oil. Any remaining oil will cause surface contamination or adhesive residue.
• After the tape has been removed from the adherend, traces of the adhesive may remain, interfering with painting, plating, etching, or gluing of the surface. Please inspect conditions thoroughly before application.
• Tape may peel off the paint from painted boards, depending on conditions, such as paint baking. Please evaluate thoroughly prior to use.
• Surface treated boards, such as alumite, may exhibit different SPV (peeling) properties, depending on treatment conditions. Please evaluate thoroughly prior to use.
• Please contact our respective sales division for applications using natural adherends (such as marble, stone or lumber).
• Please evaluate the surface cleaning, priming, and paint baking conditions thoroughly when painting on surfaces after SPV is peeled off, and confirm the paint adhesion prior to use.
• Please note that the surface of the adherend may repel paint or exhibit poor paint adhesion after SPV-362MK2/362X-2K2 is peeled off.
• The above datasheet is a sample of observed values under certain testing conditions, not guaranteed performances.
• The quality, performance, and functions of the product will differ according to conditions of use. Please contact our respective sales division for full product details.
• The actual performance of the product may differ from the sample observation values under severe conditions. Please test and evaluate the product thoroughly for your safety and optimum results.
• The product and its features are subject to change or discontinuation without prior notice.
• The intellectual property rights of this document belong to Nitto Denko Corporation. Please contact our sales division regarding the use of this document for purposes not intended by Nitto Denko Corporation. Copying and/or reproducing documents without notice are strictly prohibited. All rights reserved.