How to Remove Red Threadlocker?

It can be difficult removing LOCTITE^® red threadlocker, and it’s a common vehicle maintenance question. While the strength of our red threadlockers is formidable and meant to be a permanent assembly method, don’t believe the myths: red threadlocker can be disassembled with the right technique.

When disassembling red threadlocker, the process is a little different than for other threadlockers. The key is to apply localized heat greater than 550° F. Then, once the threaded assembly is hot, the bolt can be unthreaded. Without applying heat to the assembly, it’s likely that over time, a bolt would break before coming loose.

The ideal placement of red threadlockers is on bolts ranging from 1/4″ to 3/4″ diameter for some of the following:

• Bearing caps
• Motor mounts
• Suspension bolts
• Heavy-duty equipment area