Devcon metal putty epoxies effectively rebuild equipment to original specifications, preventing failures from occurring, reducing downtime, maintenance cost, and maintenance intervals. The products are easy to apply by plant maintenance personnel with minimal training.
Devcon with over 60 years of proven success globally, has a specially formulated range of epoxy coating that protects and repairs your equipment from heavy impact wear and abrasion.
METAL REPAIR EPOXIES
Metal-filled epoxy technology that allows for fast economical permanent repairs for power plants and mining equipment. They can be machined, tapped and drilled, and corrosion resistant to harsh chemicals. These products are available in pour-able versions that can be used to provide accurate detail reproductions for short-run prototype mold patterns, holding fixtures, and forming dies.
Devcon 10110 Plastic Steel Metal Putty (A)
Is the original metal-filled epoxy putty, it is ideal for repairing areas where welding or brazing would be impractical.
- Can be drilled, tapped, and machined.
- Conforms to the requirements of MIL-PRF-24176C, Type I
Devcon 10210 Plastic Steel Metal Liquid (B)
Is a pourable steel-filled epoxy that provides accurate detail reproduction in making holding fixtures, light-gauge forming dies, and molds.
- Can be drilled, tapped, and machined
- Qualifies under Federal Specification MMM-A-1754, Adhesive/Sealing
Devcon 10240 5min Plastic Steel Metal Putty (SF)
Is a fast-curing, steel-filled epoxy for emergency repairs at temperatures as low as 4°C.
- Repaired parts can be returned to service within one hour
- Mixes applies and cures at temperatures as low
Devcon 10270 Stainless Steel Metal Putty (ST)
Stainless steel-filled epoxy putty for patching, repairing and rebuilding stainless steel surfaces as well as food processing equipment.
- Bonds to ferrous and non-ferrous metals
- NSF 61 Certified
Devcon 10610 Aluminum Metal Putty (F)
Aluminum-filled epoxy putty for dependable nonrusting repairs to aluminum castings, machinery and equipment.
- Can be machined drilled or tapped using conventional metal working tools
- Widely used in HVAC applications, it conforms to requirements of MIL-PRF-24176C, Type II
Devcon 10710 Aluminum Liquid (F-2)
Aluminum-filled pourable epoxy for making molds, patterns and holding fixtures.
- It can be drilled, tapped and machined
- Hardens in just over 1 hour; cures in 16 hours
- Qualifies under Federal Specification MMM-A-1754, Adhesive/Sealing
Devcon 11800 Underwater Repair Putty (UW)
High-performance technology for repairing, patching, and rebuilding equipment in habitually wet environments, including underwater.
- Non-rusting; easy-to-mix and apply
- Eliminates the need for substrate to be thoroughly dry before repair.
Devcon 10260 Bronze Putty (BR)
Bronze-filled epoxy putty for repairing bronze and brass bushings, shafts, castings and equipment parts.
- Repairs and rebuilds areas where brazing would be undesirable or impossible
- Bonds securely to bronze alloys, brass, copper, and ferrous metals
Devcon 11410 Wear Resistant Putty (WR-2)
Smooth, non-rusting, all-purpose epoxy putty for repairs requiring low-friction finishes, such as machine lathe beds.
- Bonds to steel, iron, aluminum, ceramic, concrete, brass, and some plastics
- Contains wear-resistant fillers for low friction applications
WEARING COMPOUNDS
Specially formulated wear-resistant epoxy coatings that protect dry materials handling and storage equipment from abrasion, corrosion, and wear. These products are trowelable, non-sag putties available in large particulate, high impact, and high-temperature formulas.
Devcon Wear Guard Fine Load
High-density, micro-alumina ceramic bead-filled epoxy system for protecting equipment that handles particulate smaller than 1" 8”
- Withstands operating temperatures as high as 148°C
- Outstanding resistance to a wide range of chemicals
Devcon Wear Guard High Load
Alumina ceramic bead-filled epoxy system with outstanding abrasion resistance for severe service conditions with particulate greater than 1"8”.
- Trowels onto overhead or vertical surfaces without sagging
- Ideal for repairing scrubbers, ash handling systems, pipe elbows, screens, and chutes.
Devcon Wear Guard High Temp
High-density, ceramic bead-filled epoxy system for maximum wear and abrasion resistance in high-temperature applications.
- Heat-cured, trowelable system that gives up to 30% improvement over conventional wear compounds
- Withstands continuous service temperatures to 232°C
PRECISION REPAIR COMPOUNDS
Ceramic-filled epoxy technology used to make permanent repairs to pumps, shafts, pipes, and tanks where a corrosion-resistant polymer is needed to protect all metals against corrosion and erosion in slurry applications.
Devcon Titanium Putty
High-performance, non-rusting titanium-reinforced epoxy putty for making repairs that can be precision machined.
- Withstands heavy loads in harsh chemical environments
- High compressive strength
Devcon Brushable Ceramic
When applied in a 15-20 mil coating, this low-viscosity, alumina-filled, brushable epoxy compound produces a smooth, protective barrier against wear, abrasion, corrosion, erosion and chemical attacks.
- Temperature range up to 176°C
- Brushable Ceramic white is NSF 61 Certified
Devcon Ceramic Repair Putty
Trowel-able, alumina-filled epoxy compound for rebuilding, smoothing and protecting processing equipment exposed to corrosion, erosion, cavitation, chemicals and acids.
- Temperature range up to 176°C.
- Excellent for filling
Full Catalog: https://0fd5d07b-02c2-4b86-baf0-a0074f6c0b92.filesusr.com/ugd/63ab2c_e9abe3de9a544801b310385c679fd7e8.pdf
Leave a comment
All comments are moderated before being published.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.