Loctite Lb 8040 Freeze & Release Formulation Spray Lubricant 310g

Loctite Lb8040 Freeze & Release Formulation Spray Lubricant 310g

• Key Substrates : Metals
• Color : Amber
• Curing Type : Not applicable
• Application : Rust treatment

 

LOCTITE® LB 8040 is a special mineral oil designed to free rusted, corroded and seized parts. The shock-freezing effect will cool parts instantly down to -43 °C and cause microscopic cracks in the layer of rust. This allows the lubricating ingredients to wick directly into the rust by capillary action. The product leaves a thin film on the released parts that lubricates and prevents rust.

• Universal application
• Bactericide-free
• Highly resistant to micro-organisms, bacteria and fungi
• Excellent cooling and lubrication performance
• Low foaming

LOCTITE®
LB 8040™ is a special mineral oil formulation to
free rusted, corroded and seized partsThe shock-freezing
effect from a stream of lubricant at -43°C will instantly cool
parts and cause microscopic cracks in the layer of rustThis
allows the lubricating ingredients to wick directly into the rust by
capillary actionReleased parts remain lubricated and protected
from corrosion

GENERAL INFORMATION

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
with a sealant for chlorine or other strong oxidizing
materials.
For safe handling information on this product, consult the
Safety Data Sheet (SDS).

Handling Precautions

Pressurised container. Protect from sunlight and do not
expose to temperatures exceeding 50 °C. Do not pierce or
burn, even after use. Do not spray on an open flame or any
incandescent material.Keep away from sources of ignition

Directions for use

1. Remove dirt and loose rust from parts
2. Shake can thoroughly. Spray at a distance of about 10 to
   15 cm onto the fastener to be treated for 5 to 10seconds
3. Allow the product to react for 1 to 2 minutes, before
   attempting to release the seized part
4. Repeat application if necessary

Storage

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.

Not for product specifications

The technical data contained herein are intended as reference
only. Please contact your local quality department for
assistance and recommendations on specifications for this
product.