Loctite Lb8017 Moly Dry Film Anti-seize Lubricant 226.8g

Loctite Lb8017 Moly Dry Film Anti-seize Lubricant 226.8g

• Color : Black
• Curing Type : Non-curing
• Application : Lubrication and Anti-seize

 

LOCTITE LB 8017 is a black, molybdenum-disulphide based solid film lubricant. It is a heavy-duty lubricant used for general plant maintenance, metal working trade, machinery manufacturers and manufacturers of military and commercial jet engines. Typical applications include Maintenance, Aerospace, Automotive Heavy Equipment, Electrical and Petro Chemical industries.

• Molybdenum-disulphide based solid film lubricant
• Heavy-duty lubricant
• For continuous use in sliding friction, at temperatures from -20.2°F to +752°F (-29°C to +400°C)
• For anti-seize lubrication, LOCTITE LB 8017 functions from -20.2°F to +2,399°F (-29°C to +1,315°C)

LOCTITE®
LB 8017 is a molybdenum-disulfide based solid film
lubricant. It is a heavy-duty lubricant used for general plant
maintenance, metal working trade, machinery manufacturers
and manufacturers of military and commercial jet engines. For
continuous use in sliding friction, at temperatures from -29 °C
to +400 °C. For anti-seize lubrication, LOCTITE®
LB 8017
functions from -29 °C to +1315 °C . Typical applications include
Maintenance - threaded lubricant, dry bearing surfaces, slides,
guides, pins, conveyor chains, exposed "dry" gears, flexible
shafts, press fits, valve stems, shaft/packaging wear-in, "easyoff" coating for boiler exhaust surface deposits, power
transmission couoplings, Production - swaging, metal forming,
cold extrusion, warm extrusion, cold and warm headings, "dry"
lubricant for mechanical linkages, Aerospace - gas turbine
engine blades, valves, bearings, vacuum and radiation
applications, Automotive, Heavy Equipment - cam wear-in,
brake mechanisms, cables, gear couplings, Electrical - circuit
breakers, rheostats, switches, Petro Chemical - valves,
boilers, flanges, dampers

TYPICAL PERFORMANCE

An anti-seize lubricant used on a bolt helps to develop greater
clamp load for the same torque compared to an unlubricated
bolt. An additional benefit is greater uniformity in clamp load
among a series of bolts

Fluid Resistance

An air-dried film of LOCTITE®
LB 8017 can be softened and
dissolved by organic solvents, oils, etc., but it will withstand
water and water solutions. Oven cured films will not dissolve in
most solvents and fluids.

GENERAL INFORMATION

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
with a sealant for chlorine or other strong oxidizing
materials.
For safe handling information on this product, consult the
Safety Data Sheet (SDS).

Directions for use

1. May be applied by brushing, dipping or spraying directly to
   clean metal surfaces.
2. Prior surface treatments -- common metal protecting
   conversion coatings -- can be used to enhance corrosion
   resistance and wear life.

Not for product specifications

The technical data contained herein are intended as reference
only. Please contact your local quality department for
assistance and recommendations on specifications for this
product.

Storage

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.