Loctite Sf 7840 Natural Blue Degreaser 709ml

Loctite Sf 7840 Natural Blue Degreaser 709ml

• Color : Blue
• Curing Type : Not applicable
• Application : Surface preparation

 

LOCTITE® SF 7840 is a concentrated, biodegradable cleaner that contains no hazardous solvents and dilutes with water to serve a wide range of industrial cleaning applications. Typical applications for this product include engines, motors, castings, valves, bearings, tanks, machinery, windows, carpets, and concrete floors. The product can remove grease, lubricants, cutting oils, fuel oils, tar, road salt, light carbon, food stains, wax, animal fat, mildew, and soot.

• Biodegradable
• Solvent free, non-toxic, and non-flammable
• Can be diluted with water
• Removal of grease, oil, cutting fluids and workshop grime

LOCTITE® SF 7840™ is a concentrated, biodegradable
cleaner/degreaser that contains no hazardous solvents and
dilutes with water to meet a wide range of industrial cleaning
applications. Typical applications for this product include
engines, motors, castings, valves, bearings, tanks, machinery,
exterior siding, windows, carpets, concrete floors, asphalt,
vehicles, etc. Substances it can remove include grease,
lubricants, cutting oils, fuel oils, tar, road salt, light carbon, food
stains, wax, animal fat, mildew, & soot

GENERAL INFORMATION

This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
with a sealant for chlorine or other strong oxidizing
materials.
For safe handling information on this product, consult the
Safety Data Sheet (SDS).

Directions for use

1. Dilute LOCTITE® SF 7840™ with warm or cold water.
2. Soak or spray parts with LOCTITE® SF 7840™ and wipe
   or rinse clean.
3. Dilution levels wil vary depending upon the type and
   amount of substance being removed and the type of
   surface being cleaned. It is best to begin with a high
   concentration of LOCTITE® SF 7840™ and progress to
   weaker solutions until the most economical level of
   effective cleaning is obtained.
4. LOCTITE® SF 7840™ may attack painted surfaces in
   concentrations with less than 20 parts water.
5. NOTE: Optimum performance occurs with stronger
   concentrations, dilution with warm water, agitation or
   scrubbing and extended surface contact.
6. CAUTION: Cleaner residues may inhibit the cure of
   anaerobic products.

Not for product specifications

The technical data contained herein are intended as reference
only. Please contact your local quality department for
assistance and recommendations on specifications for this
product.

Storage

Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.